Albi Intumescent Coatings
Albi Intumescent Coatings at a Glance
PPG HPC Coatings are designed to meet the needs of the commercial architectural market and the industrial market for atmospheric service conditions. PPG HPC product lines include AQUAPON® WB Epoxies, DURETHANE® DTM Polyurethanes, PITT-GUARD® Surface Tolerant Epoxy, PITT-TECH® PLUS
Acrylic Coatings and PITTHANE® ULTRA Polyurethane Finishes. The products listed are compliant with the California Air Resources Board regulations, but may not necessarily be compliant with SCAQMD Rule 1113.
AQUAPON® WB is a water-borne epoxy interior/exterior coating system for use in commercial, institutional or industrial environments or where a tough, impact, abrasion, mar and stain resistant coating is required. Suitable for use on properly prepared and primed steel, galvanized metal, aluminum, copper, plaster, concrete, masonry and wood surfaces. Also recommended as a floor coating. Not compliant with SCAQMD Rule 1113.
DURETHANE® DTM is a surface tolerant, high solids, high build, two component acrylic urethane formulated for direct-to-metal applications. This product is compliant for applications in areas with VOC requirements of less than 250 g/L (2.08 lbs./gal.). Not compliant with SCAQMD Rule 1113.
PITT-GUARD® is a surface tolerant epoxy that can be applied direct-to-rust. Easy to use and ideal for a variety of interior and exterior environments, it offers excellent adhesion to minimally prepared surfaces and tightly adhering rust. Not compliant with SCAQMD Rule 1113.
PITT-TECH® PLUS is a high gloss, semi-gloss and satin industrial primer and finish line of 100% Acrylic waterborne enamels designed for direct-to-metal application. Pitt-Tech® Plus coatings provide corrosion protection, chemical and solvent resistance, and are fast drying with low odor. Recommended for use on properly prepared interior or exterior metal, masonry, plaster, wood, and drywall surfaces. SCAQMD Rule 1113 Compliant as packaged.
PITTHANE® ULTRA is a high performance urethane enamel that provides excellent long-term gloss and color retention and superior chemical, mar, and abrasion resistance. It can be used on interior and exterior surfaces and also on flooring. Not compliant with SCAQMD Rule 1113.
Precision Coatings manufactures high performance finishes based on innovative polyurethane and polysiloxane technologies. Precision Coatings utilizes high grade resins and automotive grade pigments to produce extended life cycle finishes that meet the needs of architects, designers and specifiers.