 This site best viewed using the most recent version of Flash Player |
(562) 691-9600 California Arizona Nevada Oregon Washington |
|
|
|
Amercoat Corrosion Resistant Primers
Amercoat 68HS is a corrosion resistant zinc rich epoxy primer that protects steel substrates by sacrificing the zinc component and also insulating the steel substrate through barrier properties. Amercoat 68HS is designed to meet the needs of steel structures in coastal, high-humidity and offshore environments. Amercoat 68HS can be topcoated with PSX 700, Amershield, Amershield VOC, Amerlock 400, Amerlock 2, Amercoat 240 and Amercoat 385. Amercoat 68HS is thinned with Amercoat 65 thinner or Amercoat 911 thinner. Please see the Amercoat 68HS data sheet or application instructions for thinning information. Amercoat 240 is an edge retentive, surface tolerant, corrosion resistant, two component, high-solids epoxy primer. Amercoat 240 is designed to reduce edge corrosion on surfaces with angles and welds where primers usually provide the lease amount of protection. Amercoat 240 is insulative and protects against corrosion by forming a barrier to water and salts. Amercoat 240 can be thinned Amercoat 65 thinner. Please see the Amercoat 240 data sheet and application instructions. Amercoat 385 is a surface tolerant, corrosion resistant, polyamide epoxy primer that is insulative and protects substrates by forming a barrier to water and salts. Amercoat 385 can be thinned with Amercoat 65 or Amercoat 911 in applications that allow 340 grams per liter or greater VOC. Please see the Amercoat 385 data sheet and application instructions. Amercoat 385PA is a zinc phosphate, corrosion resistant, polyamide epoxy shop primer that provides corrosion protection through a zinc phosphate inhibitive process as well as an insulative barrier type process. Amercoat 385 PA can be thinned with Amercoat 65 thinner or Amercoat 911 thinner in applications that allow 340 grams per liter VOC or greater. Please see the Amercoat 385 data sheet for Amercoat 385PA data and application information. We recommend you consider purchasing Amercoat 65 thinner which is blended to improve the application of Amercoat 68HS, Amercoat 240, Amercoat 385 and Amercoat 385PA in varying environmental conditions. Amercoat 65 Thinner Amercoat 911 thinner can also be used to thin Amercoat 68HS, Amercoat 240, Amercoat 385 and Amercoat 385PA in varying environmental conditions. Customers requiring non-HAPS thinners in their production facilities use Amercoat 911 thinner. Amercoat 911 Thinner
|
|
Members of SSPC the Society for Protective Coatings and CSI the Construction Specification Institute Copyright © 2002-2007 Pacific Southwest Supply,
Inc. All rights reserved. |
