PPG Amrcoat ppg amercoat

Amercoat Corrosion Resistant Primers

Amercoat Corrosion Resistant Primers

Amercoat 68HS Product Data Sheet | Application Instructions

Amercoat 68HS is a corrosion resistant zinc rich epoxy primer that protects steel substrates by sacrificing the zinc component and also insulating the steel substrate through barrier properties. Amercoat 68HS is designed to meet the needs of steel structures in coastal, high-humidity and offshore environments. Amercoat 68HS can be topcoated with PSX 700, Amershield, Amershield VOC, Amerlock 400, Amerlock 2, Amercoat 240 and Amercoat 385. Amercoat 68HS is thinned with Amercoat 65 thinner or Amercoat 911 thinner.

Amercoat 68HS VOC Product Data Sheet | Application Instructions

Amercoat 68HS VOC is a corrosion resistant zinc rich epoxy primer that protects steel substrates by sacrificing the zinc component and also insulating the steel substrate through barrier properties. Amercoat 68HS VOC is designed to meet the needs of steel structures in coastal, high-humidity and offshore environments and also meets California's 100 grams per Liter VOC requirements for the SCAQMD. Amercoat 68HS VOC can be topcoated with PSX 700, Amershield, Amershield VOC, Amerlock 400, Amerlock 2, Amercoat 240 and Amercoat 385. Amercoat 68HS is thinned with Amercoat 65 thinner or Amercoat 911 thinner.

Amercoat 240 Product Data Sheet | Application Instructions

Amercoat 240 is an edge retentive, surface tolerant, corrosion resistant, two component, high-solids epoxy primer. Amercoat 240 is designed to reduce edge corrosion on surfaces with angles and welds where primers usually provide the lease amount of protection. Amercoat 240 is insulative and protects against corrosion by forming a barrier to water and salts. Amercoat 240 can be thinned Amercoat 65 thinner.

Amercoat 385 Product Data Sheet | Application Instructions

Amercoat 385 is a surface tolerant, corrosion resistant, polyamide epoxy primer that is insulative and protects substrates by forming a barrier to water and salts. Amercoat 385 can be thinned with Amercoat 65 or Amercoat 911 in applications that allow 340 grams per liter or greater VOC.

Amercoat 385PA Product Data Sheet | Application Instructions

Amercoat 385PA is a zinc phosphate, corrosion resistant, polyamide epoxy shop primer that provides corrosion protection through a zinc phosphate inhibitive process as well as an insulative barrier type process. Amercoat 385 PA can be thinned with Amercoat 65 thinner or Amercoat 911 thinner in applications that allow 340 grams per liter VOC or greater.

Amercoat 65 Thinner

We recommend you consider purchasing Amercoat 65 thinner which is blended to improve the application of Amercoat 68HS, Amercoat 240, Amercoat 385 and Amercoat 385PA in varying environmental conditions.

Amercoat 911 Thinner

Amercoat 911 thinner can also be used to thin Amercoat 68HS, Amercoat 240, Amercoat 385 and Amercoat 385PA in varying environmental conditions. Customers requiring non-HAPS thinners in their production facilities use Amercoat 911 thinner.

Top

Amercoat Topcoats

Chemical containment structure is coated with Ameron's protective coatings consisting of Amerlock 2 primer and Amercoat acrylic polyurethane topcoat.

Amercoat 220 Product Data Sheet | Application Instructions

Amercoat 220 protective coatings are acrylic emulsion waterborne direct to metal topcoats or can be applied over Dimetcote 21-5 inorganic zinc primer, Amercoat 385, Amerlock 400, Amerlock 2 and Amercoat 240 as a topcoat.

Amercoat 335 Product Data Sheet | Application Instructions

Amercoat 335 protective coatings are waterborne acrylic epoxy topcoats in a wide variety of colors that can be applied direct to metal or over Amercoat 385, Amerlock 400, Amerlock 2 and Amercoat 240 as to topcoat. Amercoat 335 is used as a wall coating in labs, clean rooms, hospitals, bakeries, commercial kitchens and manufacturing facilities. Please see the Amercoat 335 application instructions.

Amercoat 450H Product Data Sheet & Application Instructions

Amercoat 450H protective coatings are high gloss acrylic aliphatic polyurethanes used as an exterior topcoat for steel tanks, signage, pipelines, structural steel, architecture and power generation facilities. Amercoat 450H is available in a wide rage of colors. Amercoat 450H can be applied as a topcoat over Amercoat 385, Amerlock 400, Amerlock 2 and Amercoat 240.

Amercoat 450HSG Product Data Sheet & Application Instructions

Amercoat 450HSG protective coatings are semi-gloss acrylic aliphatic polyurethanes used as an exterior topcoat for steel tanks, signage, pipelines, structural steel, architecture and power generation facilities. Amercoat 450HSG is available in a wide rage of colors. Amercoat 450HSG can be applied as a topcoat over Amercoat 385, Amerlock 400, Amerlock 2 and Amercoat 240.

Amercoat 65 Thinner & Amercoat 911 Thinner

Amercoat 65 thinner and Amercoat 911 thinner are used to thin Amercoat 450H and Amercoat 450HSG.

Top

 

Contact numbers

Phone: 562.691.9600 or 714.777.0300
Fax: 714.777.3586
E-Mail: support@pacificsouthwest.net

Search

Other Available Coatings

PPG Amercoat Documentation

PSX Data Sheets & Application Instructions

 

Home | About | Products | Case Histories | Alliances | Resources | Contact | Privacy Statement | Sitemap