|
Dudick, Inc. has been solving corrosion
& biological containment problems for over 35 years. With
thousands of projects in food processing, steel, chemical, pulp
& paper, water treatment and biological containment labs.
Architectural and Lab Flooring
From thin mil systems (3-4 mils) to the
thickest (250 mil), 100% solids low odor to highly decorative
finishes, we offer a large variety of basic floors to start
with, then each is customized to your exact needs.
Dudick Flooring Selection Guide
Commercial Food
Service and Food Processing
Dudick Shock-Crete is an anti-microbial, organic
acid resistant, hot process tolerant and steam resistant floor topping that can
be returned to service in as little as twelve hours. Dudick Shock-Crete
can be applied as a 3/16" semi-self leveling floor system or up to 3/4" inch
concrete floor topping.
Shock-Crete
improves slip resistance, safety, cleanability and durability in
food process facilities, commercial bakeries and commercial
kitchens. A west coast based food processor reports a 17%
savings in water used for floor cleaning and a dramatic cut in
slip and back injuries due to the use of Dudick Shock-Crete on
food process floors.
-
Shock-Crete HD
Floor Topping Data Sheet
-
Shock-Crete SL Semi-Self Leveling Data Sheet
-
Shock-Crete
Vertical Data Sheet
-
Shock-Crete HD
Floor Topping Specification
-
Shock-Crete SL Semi-Self Leveling Specification
Bio-Medical, Pharmaceutical, Food Processing Dry and Wet Floor
Selection Guide
Bio-Medical and Pharmaceutical Facilities
Dudick provides Steri-Flor and Steri-Wall
systems globally to bio-medical and pharmaceutical operators.
This anti-microbial system is designed to meet the most rigorous
industry standards for cleanability and durability.
|
Bio-Medical Facility Floor & Wall Systems
BioSafety Level 3 and 4 Systems
Dudick's coating systems designed for BioSafety
Level 3 and BioSafety Level 4 labs are the proven leader in
protection, sterilization and cleanability. Dudick's
chemical engineering team works closely with architects and
engineers designing BSL Level 3 and Level 4 labs to ensure the
biological containment systems meet the design criteria of each
facility. Dudick also works side by side with the coatings
applicator to ensure the application is per the design.
BSL Level 3 and Level 4 systems from Dudick are proven and go
well beyond the standards of the industry.
Industrial Coatings and Linings
Dudick, Inc. provides chemical
containment systems for a wide range of chemicals for primary
and secondary containment. Epoxy novolac, vinylester,
novolac vinylester, flake filled, reinforced and carbon filled
systems are available from Dudick to meet the broadest range of
chemical process containment.
-
-
- Steri-Flor Bio-Medical / Pharmaceutical
- Steri-Wall Bio-Medical / Pharmaceutical
- Shock-Crete Food Processing /Commercial
Kitchens
- Protecto-Crete Chemical Containment
- Protecto-Coat Chemical Containment
- Protecto-Flex Reinforced Chemical Containment
- Protecto-Glass Reinforced Chemical Containment
- Protecto-Line Process Tank Linings
- Polymer Alloy Durable Epoxy Flooring Systems
Detail
for Coating Application
-
Cove Base
-
Drain
Detail
-
Expansion Joint
-
Floor Termination Joint
Visit Dudick on-line
www.dudick.com |
